Taiwan Coido Inflation Pump 6826 with Tire Pressure

Instructions :

• Made by COIDO, a famous Car accessories manufacturer in Asia, skillful workmanship, quality asured, meet international standard.
• Insert the power plug of the pump into the Cigar Lighter.
• Connect the adaptor which is at the tail end of the pump to the Air valve, and screw tightly.
• Start the motor, then it begin working.
• When pumping, gauge pointer will go up with the air pressure, when reached the normal air pressure (commonly 28~35PSI), turn off the switch, take off the plug and valve key.

Note:

• When using it, you should start the car motor,strengthen electron and extend life-span of the battery.
• This device only support DC12V/15A, if you would like to use AC Power, you have to add transformer.
• Common car pumping, about 3 minutes will reach the normal tire pressure, if at the beginning, the pointer of the apparatus go up quickly to 50-100PSI in a short time, this means a blocked of air, the air didn't enter into the tire, you should close the power and take off the air inlet at once, and try again.
• When using it, do not leave it alone, pay attention to the tire pressure, do not pump it too saturated. (every tire is on normal pressure, tire pressure is marked on the tire, and refer to the instructions of the car)
• If the car Cigar Lighter is unclearn,or it's rusty,or if fuse is burnt, this device will not work, so you should make sure the Cigar Lighter is on good condition of electric conduction, fuse is fine.this device is with fuse in the plug, if it can not work, you should twist the plug to check and change it. (fuse:15TOA)
• To make sure the device on good working,you should not use it over 10 minutes, if you need to pump for a long time, you have to use it for 10 minutes, and 10 minuites for rest to cool it off, then continue, or the device and its accessories will be damaged.