Navibe mercury 100 Bike Outdoor GPS Compass Logger Multi-function Pedometer

Features:

• Cycling Mode shows Odometer / Travel Distance / Travel Time / Azimuth / Satellite based 24 hour clock / Temperature / Max Velocity / Average Velocity / Calories
• Setup 4 Points of Interest (POI) on the run in the Waypoint Mode or via PC and see your straight line Distance To Go as well as Time Of Arrival at POI. POI's done on the run can be downloaded into the software
• Setup to 50 points in the Route Mode on the cycle / run or via PC, to not only to ride, but also to share with friends as points saved on the run can be downloaded into supplied software, saved and send to friends utilising a similar system.
• Download a complete GPS data log of your cycle or run to your PC and overlay your route on either a satellite or map based image. The free software will also give you the distance travelled, total time, average based on total time, maximum velocity, calories burned etc. These logs can be saved for later retrieval together with the route followed. Data log points can be altered between 10 seconds to 3600 seconds
• The software, supplied free of charge, utilises Google Maps™ and Google Earth™ technology and therefore utilising an Internet connection will always show the latest maps or satellite imagery available at that point in time
• The unit is capable of 20 hours of run time if not running the unit's backlight (depending on environmental conditions as well as operating and caring for the system according to the supplied manual)
  

Specifications:

• Receiver: SURF Star III, 20 parallel channels
• Frequency: L1, 1575.42 MHz C/A code
• Antenna: Built in 18x18x4mm patch antenna
• SBAS: WAAS and EGNOS 
• Re-aquisition: Average 0.1 seconds
• Hot Start: Average < 1 seconds
• Warm Start: Average < 38 seconds
• Cold Start: Average < 42 seconds     
  
• Tracking Sensitivity: -159 dBm
• Acquisition Sensitivity: -142 dBm
• Processor: SiRF ARM7 processor
• Display: LCM-ICON type with backlight
• Input Method: 3 buttons     
  
• Power Consumption: 35mA/20hrs
• Power Supply: 850 mAh Lithium-ion rechargeable battery
• Dimensions: 91.1 x 46.1 x 23.9 mm
• Operating Temperature: 0° C to +60° C
• Storage Temperature: -20° C to +75°C
• Operating Humidity: 5% - 95% RH, non condensing
• Waterproof : IPX7
• Specifications are subject to change without notice 

Contents:

• Mercury 100 Unit
• USB Cable for linking Mercury 100 to PC and Mercury 100 software
• AC / DC adapter for charging Mercury 100 unit without the use of a PC
• Mounting bracket for use with handlebar or stem
• Mercury 100 Software which includes an electronic manual for the Mercury 100, the drivers to connect the unit to a PC and the Mercury 100 software that allows the setup, download and upload of various functions
• A quick start manual